Versatile. Innovative. Decorative.

The infrared heaters from HALLER Infrarot have plenty to offer

Heat at the highest level.

Find your partner for infrared heaters in Germany

LED

Sunny heat. Pleasant light.

Light frame

for your infrared heating system

Information

The special light frame is attached behind the IR panel with magnets. The panel prevents the light from entering the room directly and therefore distributes a soft and pleasant light. The high-quality aluminium frame dissipates the heat perfectly.

The indirect lighting is available with different light temperatures. In this way, the best solution for a light source can be found for the many different usage areas.

Living rooms and bedrooms

The warm-white light (3000 K) gives the lighting a cost effect. Even the production of melatonin is not affected, and you can enjoy a relaxing night’s sleep.

Work room

The neutral white light slows down the production of melatonin, and has a similar effect to caffeine. The light induces outstanding concentration and creates a fatigue-free zone.

Bathroom

Warm-white light (3000 K) and neutral white light (4000 K) are combined in the bathroom. This has the advantage that you are wide awake straight away in the morning because of the cool light. In the evenings, you can then enjoy a relaxing bath in warm light. The LEDs have a nominal service life of 35,000 hours. This means that the lighting still works at 70% of its illuminance after this time. Because of its temperature resistance, it is ideal for use on heat wave heating.

Specifications

Efficient, invisible lighting

Low energy consumption (87 Lumen/Watt)

Pleasant indirect light, optionally neutral white (4000 K) or warm white (3000 K).

Temperature resistant, therefore suitable for the Classic infrared heating panel.

Maintenance-free

Quick and easy installation by clipping on

Extremely durable and long-lasting (35000 hours)

Material: Aluminium profile/plastic cover/LED light strip

Luminance: 14.4 W/m

Rated output: dependent on room size

Colour temperature: 3000K or 4000K

Radiation angle: 120°

Luminous flux: 1250 lm/m

Nominal service life: 35000 hours

Ambient temperature: up to 50°C

Protection class: IP20

Dimmable: Yes

Energy efficiency class A+

Available sizes and possible variants

The LED light frame indirect is available for the following models: Elegance BIO, Classic BIO, Thera P8, BlackBoard 

Model Dimensions  
LI 17060 x 25  
LI 25090 x 25  
LI 35060 x 50  
LI 500 120 x 38  
LI 680 100 x 62.5  
LI 710 170 x 38  
LI 850 110 x 70  
LI 1000 150 x 60  
LI 1250 150 x 75  
LI 1500 180 x 75  


Included in scope of delivery:
 power supply, light frame, remote control 
Optionally available: Button instead of remote control

Light frame

indirect

Downloads

Information about the HALLER light frame indirect

Light attachment

for mirror and glass

Information

The light attachment for the HALLER Reflex (mirror heater) and the HALLER Exclusive (glass heater) is the optimum solution for modern and power-saving lighting. A light attachment with a circumference of approx. 150 cm is four times brighter than a 60 Watt light bulb. In spite of the brightness the light does not dazzle, since the LEDs have been provided with the optimum cover. This leads to light scatter. The scope of delivery includes a switchable driver which can be switched on and off or dimmed using the provided remote control. Since control takes place via radio, no additional cables are required.

Particularly in the work room and the bathroom, the light attachment is an ideal solution.

The neutral-white light (4000 K) has a similar effect to caffeine. It encourages the concentration and prevents fatigue. The LEDs have a nominal service life of 35,000 hours. This means that the lighting still works at 70% of its illuminance after this time. Because of its temperature resistance, it is ideal for use on heat wave heating.

Specifications

Efficient lighting

Low energy consumption (87 Lumen/Watt)

Pleasant non-dazzling light in neutral white (4000 K)

Temperature resistant, therefore suitable for the REDPUR Reflex (mirror heater) and the REDPUR Exclusive (glass heater)

Maintenance-free

Extremely durable and long-lasting (35000 hours)

Material: Aluminium profile/plastic cover/LED light strip

Luminance: 14.4 W/m

Rated output: dependent on room size

Colour temperature: 4000K

Radiation angle: 90°

Luminous flux: 1250 lm/m

Nominal service life: 35000 hours

Ambient temperature: up to 50°C

Protection class: IP20

Dimmable: Yes

Energy efficiency class A+

Available sizes and possible variants

The LED light attachment is available for the following models: Exclusive (glass heater), Reflex (mirror heater)

Suitable for model Dimensions Possible widths
Exclusive 650103 x 63 cm 103 cm or 63 cm
Exclusive 950143 x 63 cm 143 cm or 63 cm
Reflex 36063 x 53 cm 63 cm or 53 cm
Reflex 650 103 x 63 cm 103 cm or 63 cm
Reflex 950 100 x 62,5 143 cm or 63 cm


Included in scope of delivery:
 power supply, light frame, remote control 
Optionally available: Button instead of remote control

Downloads

Information about the REDPUR light attachment for mirrors and glass

Information

You can use your infrared heating in an ideal way with this lighting system. Even with small light frames, as much light is generated as five 60 Watt lightbulbs. The high-quality aluminium frame dissipates the heat perfectly.

Because of the translucently covered frame, the light points of the LEDs are evenly distributed, which provides pleasant lighting. The room is optimally lit by the light points, which are angled downwards. You are not dazzled, and little shadow is cast.

The scope of delivery includes a switchable driver which can be switched on and off or dimmed using the provided remote control. Since control takes place via radio, no additional cables are required. All cables that come into contact with the infrared heating are heat-resistant silicone cables.

The indirect lighting is available with different light temperatures. In this way, the best solution for a light source can be found for the many different usage areas.

Living rooms and bedrooms

Because of the warm-white light (3000 K), the room lighting has a cosy and pleasant effect, regardless of whether you are lying relaxed in bed or enjoying your lunch at the dining table.

Work room

The neutral-white light (4000 K) is reminiscent of daylight and keeps the human organism awake so that you can carry out your work without fatigue. The LEDs have a nominal service life of 35,000 hours. This means that the lighting still works with 70% of its illuminance after this time.

Because of its temperature resistance, it is ideal for use on heat wave heaters.

Specifications

Efficient lighting

Low energy consumption (87 Lumen/Watt)

Pleasant light, optionally neutral white (4000 K) or warm white (3000 K).

Temperature resistant, therefore suitable for the Classic infrared heating panel.

Radiation angle of the light 45° downwards

Maintenance-free

Quick and easy installation by means of self-centring attachment.

Extremely durable and long-lasting (35000 hours)

Material: Aluminium profile/plastic cover/LED light strip

Luminance: 14.4 W/m

Rated output: dependent on room size

Colour temperature: 3000K or 4000K

Radiation angle: 120°

Luminous flux: 1250 lm/m

Nominal service life: 35000 hours

Ambient temperature: up to 50°C

Protection class: IP20

Dimmable: Yes

Energy efficiency class A+

Available sizes and possible variants

The LED light frame is available for the following models: Elegance BIO, Classic BIO, Thera P8, BlackBoard 

Model Outer dimensions of LED frame
LR 17067 x 32 cm
LR 25097 x 32 cm
LR 35067 x 57 cm
LR 500 127 x 45 cm
LR 680 107 x 69.5 cm
LR 710 177 x 45 cm
LR 850 117 x 77 cm
LR 1000 157 x 67 cm
LR 1250 157 x 82 cm
LR 1500 187 x 82 cm


Included in scope of delivery:
 Power supply, light frame, remote control 
Optionally available: Touch dimmer on frame instead of a remote control

Downloads

Information about the HALLER light frame